Well, the plate went to the shops today to get the bolts counter-sunk which should eliminate the ticking. It may actually be down, but I haven't been home yet to find out.
I have found a nice water proof box that I will use and install the contactors, low voltage control system, fuses and precharge resistor in. My goal is that the only exposed electrical system will be this control box and the Kelly Controller. I will get a decent heatsink for the controller and have it mounted securely and make a clear casing for it out of plexiglass so you can see if, but the elements stay away from it.
I also recieved my vacuum pump! I now have to make a vacuum tank, get a pressure switch and some tubing. It was somewhat difficult to use the brakes without the power assist, and with the extra weight of the battery pack, it is a must.
No comments:
Post a Comment